Keithley 4200A-SCS - Page 749

Section
9: Keithley External Control Interface (KXCI) Model 4200A-SCS Parameter Analyzer Reference Manu
al
9-38 4200A-901-01 Rev. C / February 2017
Example
GT 'P Setup1'
This command string gets the program file named Setup1.
Also see
SV command: Save file (on page 9-37)
Channel mapping command
You can use the following command with any system mode page. It maps channel n to a given VS,
SMU, or VM function.
MP
This command maps channel n to a given VS, SMU, or VM function.
Usage
MP A, BBBC
A
The channel to be mapped: a value between 1 and the number of channels in the
system (9 maximum)
BBB
SMU, VS, or VM
C
The number of the SMU, VS, or VM
Details
If BBB and C are not included in the command, the function defaults to SMU<A>, where <A> is the
number of the channel to be mapped.
Example
MP 3, VM5
This command string maps channel 3 to
VM5
.
Also see
None