CPU test, processor initialisation
RAM initialisation (only in the case of reload)
Flash memory card type detection, cabinet type detection
Processor timer test (executed only after a power failure/switched reload)
Not used
HDLC test (ELIC), MTSC test, serial reset test (executed only after a power
failure/switched reload)
Not used
Not used
Not used
Not used
Initialisation of the integrated analog modem
Not used
Not used
Not used
Operating system start
Database initialisation
IOP process initialisation
Download of board codes
Download of board data, L3_ORG initialisation
Initialisation of remaining tasks
Idle bars (cycling clockwise)
System is ready
The Hicom 150 E OfficePro is ready when the date "SAT 1 JAN 00" and the time "00.00"
appear in the system telephone's display.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_5m.htm (3 of 7) [06/04/2000 13:06:35]
To Next Page
Loading...
