18 3 1 2 Trunk, select slot/line (group 1-6)
18 3 2 Connection groups
18 3 2 1 Connection group, select group, 0 = no/1 = yes
19 Display text menu
19 11 Message texts: select text number 0 - 9 and enter alphanumeric long text (up to 24
characters) (optiset E memory only)
19 12 Absence text: select text number 0 - 9 and enter alphanumeric long text (up to 24
characters) (optiset E memory only)
19 13 Set time in the format HHMM (hours minutes), enter 4 digits
19 14 Set date in the format DDMMYY (day month year), enter 6 digits
19 15 Call timer: 0 = off/1 = on
19 16 Names/numbers, 0 = only number/1 = name/
2 = name and number
19 17 Recalling, 1 = calling party/2 = called party
19 18 Transfer before answer, 1 = called party/2 = calling party
20 ISDN parameter menu
20 1 Call ID suppression, 0 = off/1 = on
20 2 Route telephone number
20 2 1 Local number, select route
20 2 2 National number, select route
20 2 3 International number, select route
20 2 4 Type of number, orig., select route:
0=unknown, 1=local, 2=national, 3=international
20 2 5 National prefix
20 2 6 International prefix
20 3 Reference clock
20 3 1 Priority list, select position (slot/port)
20 3 2 Denied list, select position (slot/port)
20 4 EU parameter
20 4 1 S0 port configuration, select slot/port and define connection type:
1 = Automatic
2 = ISDN Public PP
3 = ISDN Public PMP
4 = ISDN Bus
5 = CorNet 1
6 = CorNet 2
20 4 2 S2M port configuration, select slot/port and define connection type:
1 = ISDN Public PP
2 = CorNet 1
3 = CorNet 2
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (11 of 18) [06/04/2000 13:07:14]
To Next Page
Loading...
