20 4 3 S
0
Bus MSN, for checking purposes only
20 5 US parameters (for USA only)
21 Analogue parameters
21 1 Dial type, select slot/line:
0 = automatic, 1 = DTMF, 2 = DP
21 2 Dial pause, select route:
0 = no pause, 1 = 1s, 2 = 3s, 3 = 6s, 4 = 9s
21 3 Inc CO pause, select route: 1 = 6s, 2 = 13s
21 4 Line length, select slot/line: 0 = short 1 = long
21 5 Call detail recording TML8W (OfficePro):
0 = without GEE8, 1 = with GEE8
21 6 Silent reversal: 0 = no/1 = yes
22 System options
22 11 Music on hold (MOH) 0 = off/1 = on, always MOH/2 = on, MOH/3 = announcement
device 1
22 12 Phonebook 0 = off/1 = on
22 13 V.24 configuration
22 13 1 CB baudrate, select V.24 port, 1 = 9600 bauds/2 = 2400 bauds
22 13 2 Port allocation
22 13 2 1 CDRC (call detail recording, central)
22 13 2 1-1 Output, 0 = none/1 = V.24 port/2 = U
PN
port
22 13 2 1-2 V.24 port
22 13 2 1-3 U
PN
port
22 13 2 2 Port for CDRS (call detail recording per system)
22 13 2 3 Port for CDRT (call detail recording per trunk)
22 13 2 4 Port for CDM printout
22 13 2 5 Port for call logging
22 13 2 6 Port for CDRA (call detail recording, attendant), for configured phone box, see also
code 11 8
22 14 Divert external
22 14 1 Call connection, 0 = on answer/1 = immediate
22 14 2 CM-Elements, 0 = not executed/1 = executed
22 15 Missed calls list, 1 = only extern / 2 = extern, intern
22 16 Applications
22 16 1 UCD, 0 = denied/1 = allowed
22 17 Tones
22 17 1 Conference, alert, 0 = off/1 = on
22 17 2 Call pickup, alert, 0 = off/1 = on
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (12 of 18) [06/04/2000 13:07:14]
To Next Page
Loading...
