30 6 Digital modem
30 6 1 Call no., RMA, max. 6 digits
30 6 2 DDI, RMA
30 7 Callback connection
30 7 1 Call numbers, select position (1-6)
30 7 2 Access code, select position (1-6)
30 7 3 X.75 protocol, 0 = no/1 = yes
30 8 Auto CDM output, status 0 = no/1 = yes
30 9 USBS D channel access
30 9 1 Internal numbers, Remote Admin.
30 9 2 DID, RMA
31 UCD menu (OfficePro/OfficeCom only)
31 1 Group setup, select agent
31 2 Group options
31 2 1 Queue device, select group
OfficePro: announcement device 1-16
OfficeCom: announcement device 1-4
31 2 2 Queue timers, select group, time: 1-9 x 30s
31 2 3 Call cycles
31 2 3 1 Primary cycle, select group
31 2 3 2 Secondary cycle, select group
31 2 4 AICC connection, select group, 0 = off/1 = on
31 2 5 Max. waiting calls, select group
31 3 Wrap up period, 0 = no wrap up period/
1-20 = wrap up period x 30s
31 4 Call priority ext., select slot/line
31 5 Call priority int.
32 Radio paging equipment
32 1 Radio paging port (slot/line)
32 2 Radio paging type (OfficePro only), 1 = normal/2 = enhanced
32 3 Paging protocol, 1 = ESPA 4.4.5/2 = ESPA 4.4.3
32 4 Operation mode
32 4 1 Mode urgent
32 4 2 Mode normal
32 4 3 Mode text
32 5 Display
32 5 1 Number
32 5 1 1 Code length
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (16 of 18) [06/04/2000 13:07:15]
To Next Page
Loading...
