Special dial tone/
announcement
With Hicom OfficePro an announcement is issued instead of a special dial tone.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Change message texts
*9531994
2. 19-11 => Display Text Menu - Message Text
3. Select relevant text
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Change message texts
Options
2. System Parameters
3. Texts
4. Info texts
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Enter code (*68) or `Send Message' key.
2. Enter relevant internal extension number.
3. Select relevant text (0-9 or, in the case of memory, enter a different text).
4. The text sent appears on the display of the destination extension.
5. Delete the text using the code (#68) or a key.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (13 of 17) [06/04/2000 13:11:11]
To Next Page
Loading...
