LCR". The following must also be configured.
A dial plan 77-XXX referencing a new route table must be created. (77=unassigned call number in the
system, XXX=3-digit speed-dialling number)
Route 1 is entered in the route table with a reference to a new dial rule.
The format D757E2A is entered in the dial rule (D=dial, 757=replacement code for *7, E2A=repeat
XXX from the dial plan).
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_815.htm (13 of 13) [06/04/2000 13:12:59]
To Next Page
Loading...
