44. 2 Enter dialling and authorisation
information
Line 1: -
45.
* C089722UM1M2A
Enter number for the DICS server
without route code, e.g. 089722
Line 1: C089722UM1M2A
46.
Confirm Next Line 2: -
47.
* A
Enter outdial rule for digits not
routed
Line 2: A
48. F7 Return to outdial rule Outdial rule
49. 3 Enter type of carrier Line 1: undefined
50.
* 5
Select DICS carrier Line 1: DICS
51.
Confirm Next Line 2: undefined
52.
* 1
Select main carrier Line 2: Main Carrier
53. F7 Return to outdial rule Outdial rule
54. F7 Return to Least Cost Routing Least Cost Routing
55. 1 Activate Least Cost Routing State: OFF
56.
* 1
Activate Least Cost Routing State: ON
57. F8-F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> Least cost routing -> Codes and flags
2. Options -> Least cost routing -> Classes of service
3. Options -> Least cost routing -> Dial plan
4. Options -> Least cost routing -> Route table
5. Options -> Least cost routing -> LCR schedule
6. Options -> Least cost routing -> Dialing rules table
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.24 Configuring Least Cost Routing (DICS)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_824.htm (3 of 3) [06/04/2000 13:13:33]
To Next Page
Loading...
