Siemens Hicom 150 E Office - Page 646

UCD groups are to be configured.
UCD group 1 is the purchasing department and is to be assigned agents 100 and 101.
UCD group 2 is the sales department and is to be assigned agents 110 and 111.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 31-1 Activate Group Setup Agent 100: -
3. * Change Group Setup Agent 100: -
4.
1
Assign UCD group 1 Agent 100: 1
5. * Change Group Setup Agent 101: -
6.
1
Assign UCD group 1 Agent 101: 1
7. # Select other agent Agent:
8.
110
Agent 110 Agent: 110
9. * Change Group Setup Agent 110: -
10. 2 Assign UCD group 2 Agent 100: 2
11. * Change Group Setup Agent 111: -
12.
2
Assign UCD group 2 Agent 111: 2
13. F7 Return to main menu 31 UCD
Announcement device (25)
If announcement devices are required for the UCD groups, the announcement devices and
announcement types must be defined here.
The use of a "greeting message" is implemented by means of the "Ann. before answer" feature
and is not typical of UCD.
Programming with Hicom Assistant T
Step Entry Action Display
1. 25 Activate announcement device 1 = Announcement
2 = Announcement type
3 = Ann. before announcement
2. 1 Enter number of announcement devices
OfficePoint=1, OfficeCom=4,
OfficePro=16
Ann. device 1: -
3.
*0301
Assign slot 3/port 1 Ann. device 1: 0301
Hicom 150 E Office Rel.1.0 Service Manual - 8.31 UCD - Universal Call Distribution
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_831.htm (2 of 7) [06/04/2000 13:14:19]