4.
Scroll to the next announcement device Ann. device 2: -
5. *0302 Assign slot 3/port 2 Ann. device 2: 0302
6.
Scroll to the next announcement device Ann. device 3: -
7.
*0304
Assign slot 3/port 4 Ann. device 3: 0304
8. F7 Return to: Announcement Devs. Announcement Devs.
9. 2 Assign the announcement devices to ab
announcement type
Announcement type 1: Announcement*
*= Default (can be changed)
10.
Scroll to the next announcement device Ann. device 2:
Announcement
11.
*2
Change to internal music Ann. device 2: MOH
12.
Scroll to announcement device 3 Ann. device 3: Announcement
13.
*2
Scroll to announcement device 4 Ann. device 4: MOH
14. F7 F7 Return to: UCD 31 UCD
Group parameters - queue devices (31 2 1)
Queue devices are assigned to the preconfigured announcement devices.
Programming with Hicom Assistant T
Step Entry Action Display
1. 31-2 Activate Group Options 1 Queue device
2 Queue timers
3 Call cycles
2. 1 Queue device Grp 1, Mbr 1: Device 1
3. * Assign announcement device Grp 1, Mbr 1:
4. 1 Assign announcement device 1
(1st UCD group)
Grp 1, Mbr 1: Device 1
5.
Confirm and scroll to 2nd Mbr of the 1st UCD group Grp 1, Mbr 2:
6. * Assign announcement device Grp 1, Mbr 2:
7.
2
Assign Announcement device 2
(1st UCD group) and confirm
Grp 1, Mbr 2: Device 2
8.
# 2
Select 2nd UCD group and confirm Grp 2, Mbr 1: -
9.
* 2
Assign Announcement device 2 and confirm Grp 2, Mbr 2: Device 1
10.
*2
Go to 2nd Mbr (1st UCD group) and assign
Announcement device 2
Grp 2, Mbr 2: Device 1
Hicom 150 E Office Rel.1.0 Service Manual - 8.31 UCD - Universal Call Distribution
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_831.htm (3 of 7) [06/04/2000 13:14:19]
To Next Page
Loading...
