Cisco ASR 9000 Series Command Reference Guide

Total TLVs discarded: 0
Total TLVs unrecognized: 0
The following example shows how to clear the LLDP table. The output of the show lldp neighbors command
shows that all information has been deleted from the table.
RP/0/RSP0/CPU0:router# clear lldp table
RP/0/RSP0/CPU0:router# show lldp neighbors
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Device ID Local Intf Hold-time Capability Port ID
Related Commands
DescriptionCommand
Displays information about LLDP neighbors.show lldp neighbors, on page 118
Displays statistics for LLDP traffic.show lldp traffic, on page 121
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
80
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
clear lldp

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model