Cisco ASR 9000 Series Command Reference Guide

Ethernet Interface Commands on the
Cisco ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring Ethernet interfaces on the
Cisco ASR 9000 Series Router.
•
carrier-delay, page 77
•
clear lldp, page 79
•
clear mac-accounting (Ethernet), page 81
•
flow-control, page 83
•
interface (Ethernet), page 85
•
lldp, page 87
•
lldp (interface), page 89
•
lldp holdtime, page 90
•
lldp reinit, page 92
•
lldp timer, page 94
•
lldp tlv-select disable, page 95
•
loopback (Ethernet), page 97
•
mac-accounting, page 99
•
mac-address (Ethernet), page 101
•
negotiation auto, page 103
•
packet-gap non-standard, page 104
•
show controllers (Ethernet), page 105
•
show lldp, page 110
•
show lldp entry, page 112
•
show lldp errors, page 114
•
show lldp interface, page 116
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
75

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model