Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

redundancy one-way

To enforce one-way pseudowire redundancy behavior when the redundancy group is configured, use the

redundancy one-way command in the L2VPN pseudowire class configuration mode. To return to the default,

use the no form of this command.

redundancy one-way

no redundancy one-way

This command has no keywords or arguments.

Command Default

One-way redundancy is disabled.

Command Modes

L2VPN pseudowire class configuration

Command History

ModificationRelease

This command was introduced.Release 4.0.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

Task ID

OperationsTask ID

read, writel2vpn

Examples

The following example shows how to :

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class class_mpls

RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls

RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)# redundancy one-way

RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)#

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

618

Link Bundling Commands on the Cisco ASR 9000 Series Router

redundancy one-way

Cisco ASR 9000 Series Command Reference Guide

Other manuals for Cisco ASR 9000 Series