Cisco ASR 9000 Series Command Reference Guide

Examples
The following example shows how to display information about errors that are preventing configured SLA
operations from becoming active:
RP/0/RSP0/CPU0:router# show ethernet sla configuration-errors
Errors:
-------
Profile 'gold' is not defined but is used on Gi0/0/0/0.0
Profile 'red' defines a test-pattern, which is not supported by the type
The following example shows the errors from configured Ethernet SLA operations that cannot be represented
correctly in the MEF-SOAM-PM-MIB:
RP/0/RSP0/CPU0:router# show ethernet sla configuration-errors
Mon Aug 18 12:21:31.355 CEST
Profile 'gold': This operation cannot be fully represented in the MEF-SOAM-PM-MIB due to
burst configuration being present
Profile 'red': This operation cannot be fully represented in the MEF-SOAM-PM-MIB due to the
use of bin configuration for loss measurement
The operations will still work and statistics will still be gathered and retrievable using show commands.
However, you cannot retrieve all profile data from the MIB.
Note
The following configuration errors reflect profiles that work but have no data retrievable from the MIB:
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
380
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet sla configuration-errors

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model