Cisco ASR 9000 Series - Interface Mgmteth

interface MgmtEth
To enter interface configuration mode for the Management Ethernet interface, use the interface MgmtEth
command in global configuration mode. To delete a Management Ethernet interface configuration, use the
no form of this command.
interface MgmtEth interface-path-id
no interface MgmtEth interface-path-id
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Command Default
No default behavior or values
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to enter interface configuration mode for a Management Ethernet interface:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
668
Management Ethernet Interface Commands on the Cisco ASR 9000 Series Router
interface MgmtEth