Cisco ASR 9000 Series Command Reference Guide

Table 8: show lldp traffic Field Descriptions
DescriptionField
Number of LLDP advertisements sent from the
device.
Total frames out:
Number of LLDP neighbor entries removed due to
expiration of the hold time.
Total entries aged:
Number of LLDP advertisements received by the
device.
Total frames in:
Number of times the LLDP advertisements contained
errors of any type.
Total frames received in error:
Number of times the LLDP process discarded an
incoming advertisement.
Total frames discarded:
Number of times the LLDP process discarded a Type
Length Value (TLV) from an LLDP frame.
Total TLVs discarded:
Number of TLVs that could not be processed because
the content of the TLV was not recognized by the
device or the contents of the TLV were incorrectly
specified.
Total TLVs unrecognized:
Related Commands
DescriptionCommand
Enables LLDP globally for both transmit and receive operation on
the system.
lldp, on page 87
Resets LLDP traffic counters or LLDP neighbor information.clear lldp, on page 79
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
122
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp traffic

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model