Cisco ASR 9000 Series Command Reference Guide

Key: 0x0001, Port priority: 32768, Port ID: 1
State: Act (T/o) Agg (Sync) (Coll) (Dist) Def (Exp)
TLV: 0x02 - Partner Information Length: 20
System: Priority: 65535, ID: 00-00-00-00-00-00
Key: 0x0000, Port priority: 65535, Port ID: 0
State: (Act) (T/o) (Agg) (Sync) (Coll) (Dist) Def (Exp)
TLV: 0x03 - Collector Information Length: 16
Max delay: 65535
TLV: 0x00 - Terminator Length: 0
Related Commands
DescriptionCommand
Displays the LACP transmission information that used by the
transmitting device for sending packets on an interface.
show lacp io, on page 650
Enables a short period time interval for the transmission and reception
of LACP packets.
lacp period short, on page 602
Captures LACP packets so that their information can be displayed.lacp packet-capture, on page 599
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
655
Link Bundling Commands on the Cisco ASR 9000 Series Router
show lacp packet-capture

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model