show lldp errors
To display Link Layer Discovery Protocol (LLDP) error and overflow statistics, use the show lldp errors
command in EXEC configuration mode.
show lldp errors [location location]
Syntax Description
(Optional) Displays information about LLDP neighbors for the specified
location. The location argument is entered in the rack/slot/module notation.
location location
Command Default
Totals of LLDP error and overflow statistics for the system are displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readethernet-services
Examples
The following example shows sample output for the show lldp errors command:
RP/0/RSP0/CPU0:router# show lldp errors
Wed Apr 13 06:17:08.321 DST
LLDP errors/overflows:
Total memory allocation failures: 0
Total encapsulation failures: 0
Total input queue overflows: 0
Total table overflows: 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
114
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp errors
To Next Page
Loading...
