clear ethernet cfm interface statistics
To clear the counters for an Ethernet CFM interface, use the clear ethernet cfm interface statistics command
in EXEC mode.
clear ethernet cfm interface interface-path-id statistics [location {all| location}]
clear ethernet cfm interface statistics location {all| node-id}
Syntax Description
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional only when used with a specified interface) Clears MAC accounting statistics
for a designated interface or for all interfaces.
location
Clears CFM counters for all interfaces.all
Clears CFM counters for a specified interface, using rack/slot/module notation.node-id
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
166
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet cfm interface statistics
To Next Page
Loading...
Need help?
General
