DescriptionField
Total number of valid packets that were dropped after
they were received. This includes packets that were
dropped due to configured quality of service (QoS)
or access control list (ACL) policies. This does not
include drops due to unknown Layer 3 protocol.
total input drops
Total number of packets that could not be delivered
because the necessary protocol was not configured
on the interface.
drops for unrecognized upper-level protocol
Total number of Layer 2 broadcast packets received
on the interface. This is a subset of the total input
packet count.
Received x broadcast packets
Total number of Layer 2 multicast packets received
on the interface. This is a subset of the total input
packet count.
multicast packets
Number of packets sent from the interface.packets output
Total number of bytes successfully sent from the
interface.
bytes
Number of packets that were dropped before being
transmitted.
total output drops
Number of Layer 2 broadcast packets transmitted on
the interface. This is a subset of the total output packet
count.
Output x broadcast packets
Total number of Layer 2 multicast packets received
on the interface. This is a subset of the total output
packet count.
multicast packets
Related Commands
DescriptionCommand
Creates a BVI interface.interface bvi, on page 554
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
562
Integrated Routing and Bridging Commands on the Cisco ASR 9000 Series Router
show interfaces bvi
To Next Page
Loading...
Need help?
General
