clear ethernet oam statistics
To clear the packet counters on Ethernet OAM interfaces, use the clear ethernet oam statistics command in
EXEC mode.
clear ethernet oam statistics [interface type interface-path-id| location node-id all]
Syntax Description
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface type
interface-path-id
Clears the statistics for a specific node.
For more information about the syntax for the router, use the question mark (?)
online help function.
location
Path ID of the node.
node-id
Clears the statistics for all nodes on the router.all
Command Default
No parameters clears the packet counters on all Ethernet OAM interfaces.
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
177
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet oam statistics
To Next Page
Loading...
Need help?
General
