Cisco ASR 9000 Series Command Reference Guide

Examples
The following example shows how to set the hold-time and the size of a traceroute cache.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# traceroute cache hold-time 1 size 3000
Related Commands
DescriptionCommand
Enters CFM configuration mode.ethernet cfm (global), on page 207
Sends Ethernet CFM traceroute messages to generate a
basic.
traceroute ethernet cfm, on page 415
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
414
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
traceroute cache

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model