Task ID
OperationsTask ID
readinterface
Examples
The following example shows how generate a basic traceroute:
RP/0/RSP0/CPU0:router# traceroute ethernet cfm domain bar service bar mep-id 1 source
interface gigabitethernet 0/0/0/0
Traceroutes in domain bar (level 4), service bar
Source: MEP-ID 1, interface GigabitEthernet0/0/0/0
================================================================================
Traceroute at 2009-05-18 12:09:10 to 0001.0203.0402,
TTL 64, Trans ID 2:
Hop Hostname/Last Ingress MAC/name Egress MAC/Name Relay
--- ------------------------ ---------------------- ---------------------- -----
1 ios 0001.0203.0400 [Down] FDB
0000-0001.0203.0400 Gi0/0/0/0
2 abc 0001.0203.0401 [Ok] FDB
ios Not present
3 bcd 0001.0203.0402 [Ok] Hit
abc GigE0/0
Replies dropped: 0
Related Commands
DescriptionCommand
Sets the maximum limit of traceroute cache entries or the
maximum time limit to hold the traceroute cache entries.
traceroute cache, on page 413
Removes the contents of the traceroute cache.clear ethernet cfm traceroute-cache, on page
173
Displays the contents of the traceroute cache.show ethernet cfm traceroute-cache, on page
348
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
417
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
traceroute ethernet cfm
To Next Page
Loading...
Need help?
General
