Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Task ID
OperationsTask ID
read, writebundle
Examples
This example shows how to add a port onto a bundle:
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/1/5/0
RP/0/RSP0/CPU0:router(config-if)# bundle id 1
This example shows how to add an active LACP port onto an aggregated interface (or bundle):
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/6/5/7
RP/0/RSP0/CPU0:router(config-if)# bundle id 5 mode active
Related Commands
DescriptionCommand
Displays information about configured bundles.show bundle, on page 619
Displays statistics for all interfaces configured on the router
or for a specific node.
show interfaces, on page 516
Displays detailed information about LACP ports and their
peers.
show lacp bundle, on page 645
show lacp port, on page 656
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
573
Link Bundling Commands on the Cisco ASR 9000 Series Router
bundle id