show ethernet udld statistics
To display the statistics of state machine transitions and packets exchanged on an interface running UDLD
protocol, use the show ethernet udld statistics command in the ethernet interface configuration mode.
show ethernet udld statistics[interface type |unaccounted-drops ]
Syntax Description
(Optional) Displays information about the specified interface type. If an
interface is specified, only the interface-specific counters are shown and not
the node counters.
interface type
(Optional) Displays information for only the node counters.unaccounted-drops
Command Default
No default behavior or values
Command Modes
Ethernet Interface Configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readethernet-services
Examples
This example shows a sample output of the show ethernet udld statistics command:
RP/0/RSP0/CPU0:router# show ethernet udld statistics interface GigabitEthernet 0/10/0/11
Interface GigabitEthernet0/10/0/11
Counters last cleared: 01:12:11 ago
Main FSM transitions (to each state)
Link up: 1
Detection: 12
Advertize: 12
Port shutdown: 0
UDLD inactive: 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
396
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet udld statistics
To Next Page
Loading...
