Cisco ASR 9000 Series Command Reference Guide

clear controller backplane ethernet location statistics
To delete the aggregate statistics of traffic sent and received over the control Ethernet, use the clear controller
backplane ethernet location statistics command in EXEC mode.
clear controller backplane ethernet location node-id statistics
Syntax Description
Identifies the node whose controller information you want to delete. The node-id
argument is entered in the rack/slot/module notation.
node-id
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Examples
The following example shows how to clear all client statistics on the node at 0/1/1:
RP/0/RSP0/CPU0:router# clear controller backplane ethernet location 0/1/1 clients all
statistics
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
534
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
clear controller backplane ethernet location statistics

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model