Cisco ASR 9000 Series Command Reference Guide

Frame Relay Commands on the Cisco ASR 9000
Series Router
This module provides CLI commands for configuring Frame Relay services on the Cisco ASR 9000 Series
Router.
•
clear frame-relay multilink interface, page 423
•
clear frame-relay lmi interface, page 425
•
encap (PVC), page 427
•
encapsulation frame-relay, page 429
•
frame-relay intf-type, page 431
•
frame-relay lmi disable, page 433
•
frame-relay lmi-n391dte, page 434
•
frame-relay lmi-n392dce, page 436
•
frame-relay lmi-n392dte, page 438
•
frame-relay lmi-n393dce, page 439
•
frame-relay lmi-n393dte, page 441
•
frame-relay lmi-t391dte, page 442
•
frame-relay lmi-t392dce, page 444
•
frame-relay lmi-type, page 446
•
frame-relay multilink ack, page 448
•
frame-relay multilink bandwidth-class, page 450
•
frame-relay multilink bid, page 452
•
frame-relay multilink hello, page 454
•
frame-relay multilink lid, page 456
•
frame-relay multilink retry, page 458
•
pvc (frame relay), page 460
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
421

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model