Cisco ASR 9000 Series - Clear Ppp Statistics

clear ppp statistics
To clear all Point-to-Point Protocol (PPP) statistics for a PPP interface, use the clear ppp statistics command
in EXEC mode.
clear ppp statistics interface interface-path-id
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface interface-path-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeppp
Examples
The following example shows how to clear PPP statistics for a PPP interface:
RP/0/RSP0/CPU0:router# clear ppp statistics interface 0/1/0/1
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
713
PPP Commands onthe Cisco ASR 9000 Series Router
clear ppp statistics