Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

multilink

To enter the config-if-multilink submode, use the multilink command in the interface configuration mode.

multilink

Syntax Description

This command has no keywords or arguments.

Command Default

No default behavior or values

Command Modes

Interface configuration

Command History

ModificationRelease

This command was introduced.Release 3.9.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

For multilink interfaces, the multilink command provides access to the config-if-multilink submode to use

the multilink fragment-size command.

Task ID

OperationsTask ID

read, writehdlc

Examples

The following example shows how to enter the config-if-multilink submode:

RP/0/RSP0/CPU0:router# config

RP/0/RSP0/CPU0:router(config)# interface serial 0/1/0/1/1/1:0

RP/0/RSP0/CPU0:router(config-if)# multilink

RP/0/RSP0/CPU0:router(config-if-multilink)# group 1

RP/0/RSP0/CPU0:router(config-if-multilink)# commit

Related Commands

DescriptionCommand

Attaches a serial interface to a multilink interface bundle.multilink group, on page 685

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

682

Multilink Commands on the Cisco ASR 9000 Series Router

multilink

Cisco ASR 9000 Series Command Reference Guide

Other manuals for Cisco ASR 9000 Series