Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

fsm_state: 3 [Up]
im_state: 3 [Up]
fsm_req_state: 3 [Up]
cause: 0 [None]
retry_count: 0
in_loopback: No
bc_init_rcvd: Yes
bc_owned_res: Yes
cc_owned_res: Yes
is_parent_up: Yes
Last Packet Tx: 00:00:06 ago
Round trip: 00:00.000 (0 secs 999997 nsecs)
Min Round trip: 00:00.000 (0 secs 999997 nsecs)
Max Round trip: 00:00.002 (0 secs 2999991 nsecs)
cfg_lid:
mfr_t_hello: 10
mfr_t_ack: 4
mfr_retry_max: 2
--------------- Member Link Statistics ---------------
Add Link Tx: 2 Add Link Rx: 1
Add Link Ack Tx: 1 Add Link Ack Rx: 1
Add Link Rej Tx: 0 Add Link Rej Rx: 0
Remove Link Tx: 0 Remove Link Rx: 0
Remove Link Ack Tx: 0 Remove Link Ack Rx: 0
Hello Tx: 2 Hello Rx: 2
Hello Ack Tx: 2 Hello Ack Rx: 2
Loopback Detected: 0 Invalid Pkts Rx: 1
Bundle Mismatch: 0 Expired Ack Rx: 0
Hello Timer expiry: 2 Ack Timer expiry: 0
Serial0/2/1/0/1/3:0, HW state = Up, link state = Up
my_lid: Serial0/2/1/0/1/3:0
peer_lid: Serial0/2/1/0/1/3:0
flags: 0x0
fsm_state: 3 [Up]
im_state: 3 [Up]
fsm_req_state: 3 [Up]
cause: 0 [None]
retry_count: 0
in_loopback: No
bc_init_rcvd: Yes
bc_owned_res: Yes
cc_owned_res: Yes
is_parent_up: Yes
Last Packet Tx: 00:00:06 ago
Round trip: 00:00.000 (0 secs 999997 nsecs)
Min Round trip: 00:00.000 (0 secs 999997 nsecs)
Max Round trip: 00:00.002 (0 secs 2999991 nsecs)
cfg_lid:
mfr_t_hello: 10
mfr_t_ack: 4
mfr_retry_max: 2
--------------- Member Link Statistics ---------------
Add Link Tx: 2 Add Link Rx: 1
Add Link Ack Tx: 1 Add Link Ack Rx: 1
Add Link Rej Tx: 0 Add Link Rej Rx: 0
Remove Link Tx: 0 Remove Link Rx: 0
Remove Link Ack Tx: 0 Remove Link Ack Rx: 0
Hello Tx: 2 Hello Rx: 2
Hello Ack Tx: 2 Hello Ack Rx: 2
Loopback Detected: 0 Invalid Pkts Rx: 1
Bundle Mismatch: 0 Expired Ack Rx: 0
Hello Timer expiry: 2 Ack Timer expiry: 0
The following example shows how to display detailed multilink Frame Relay information for all interfaces,
including IDB information and FSM statistics, on a Cisco 4-Port Channelized T3 SPA:
RP/0/RSP0/CPU0:router# show frame-relay multilink detail
Member interface: Serial0/0/0/0/1:0, ifhandle 0x00005180
HW state = Up, link state = Up
Member of bundle interface Multilink0/0/0/0/1 with ifhandle 0x00005280
Local bid: Multilink0/0/0/0/1 Peer bid: Multilink0/0/0/0/1
my_lid: Serial0/0/0/0/1:0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
476
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay multilink