Cisco ASR 9000 Series Command Reference Guide

Task ID
OperationsTask ID
readfr
Examples
The following example shows sample output for the show frame-relay lmi-info command:
RP/0/RSP0/CPU0:router# show frame-relay lmi-info
LMI IDB Info for interface Multilink0/3/0/0/2
ifhandle: 0x6176840
Interface type: DTE
Interface state: UP
Line Protocol: UP
LMI type (cnf/oper): AUTO/CISCO
LMI type autosense: OFF
Interface MTU: 1504
-------------- DTE -------------
T391: 10s
N391: (cnf/oper): 6/5
N392: (cnf/oper): 3/0
N393: 4
My seq#: 83
My seq# seen: 83
Your seq# seen: 82
-------------- DCE -------------
T392: 15s
N392: (cnf/oper): 3/0
N393: 4
My seq#: 0
My seq# seen: 0
Your seq# seen: 0
LMI IDB Info for interface Multilink0/3/0/0/1
ifhandle: 0x6186240
Interface type: DTE
Interface state: UP
Line Protocol: UP
LMI type (cnf/oper): AUTO/CISCO
LMI type autosense: OFF
Interface MTU: 1504
-------------- DTE -------------
T391: 10s
N391: (cnf/oper): 6/5
N392: (cnf/oper): 3/0
N393: 4
My seq#: 83
My seq# seen: 83
Your seq# seen: 82
-------------- DCE -------------
T392: 15s
N392: (cnf/oper): 3/0
N393: 4
My seq#: 0
My seq# seen: 0
Your seq# seen: 0
Table 24: show frame-relay lmi-info Field Descriptions
DescriptionField
DTE
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
466
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay lmi-info

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model