show controllers pos
To display information on the Packet-over-SONET/SDH (POS) controllers, use the show controllers pos
command in EXEC mode.
show controllers pos interface-path-id [all| framer {internal| register| statistics}| internal] [begin line|
exclude line| file filename| include line]
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays information for all POS interface controllers.all
(Optional) Displays all POS framer information.framer
(Optional) Displays all POS internal information.internal
(Optional) Displays the POS framer registers.register
(Optional) Displays the POS framer cumulative counters.statistics
(Optional) Displays information beginning with the line that includes the regular
expression given by the line argument.
begin line
(Optional) Displays information excluding all lines that contain regular expressions
that match the line argument.
exclude line
(Optional) Saves the configuration to the designated file. For more information
on which standard filenames are recognized, use the question mark (?) online
help function.
file filename
(Optional) Displays only those lines that contain the regular expression given by
the line argument.
include line
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
900
SONET Controller Commands on the Cisco ASR 9000 Series Router
show controllers pos
To Next Page
Loading...
