Cisco ASR 9000 Series Command Reference Guide

Task ID
OperationsTask ID
executeethernet-services
Examples
The following example shows how to enter the most basic SLA on-demand operation to measure CFM
loopback statistics. This example implements the following defaults:
•
Send a burst once for a packet count of 10 and interval of 1 second (10-second probe).
• Use default test pattern of 0’s for padding.
•
Use default class of service (CoS) for the egress interface.
•
Measure all statistics.
•
Aggregate statistics into one bin.
•
Schedule now.
•
Display results on the console.
RP/0/RSP0/CPU0:router# ethernet sla on-demand operation type cfm-loopback
probe packet size 1500 domain D1 source interface TenGigE 0/6/1/0 target mep-id 100
Related Commands
DescriptionCommand
Deletes the contents of buckets containing SLA statistics
collected by all operations probes.
clear ethernet sla statistics all, on page 179
Deletes the contents of buckets containing SLA statistics
collected by on-demand probes.
clear ethernet sla statistics on-demand, on
page 181
Displays information about configured Ethernet SLA
operations.
show ethernet sla operations, on page 382
Displays the contents of buckets containing Ethernet SLA
metrics collected by probes.
show ethernet sla statistics, on page 385
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
238
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ethernet sla on-demand operation type cfm-loopback probe

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model