Cisco ASR 9000 Series Command Reference Guide

DescriptionField
Indicates if an Ethernet Fault Detection (EFD) event
has occurred on the interface and the type of fault that
triggered the interface to be moved to the down state
for the line protocol. The possible EFD trigger events
are:
•
capabilities-conflict
•
discovery-timeout
•
link-fault
•
session-down
•
wiring-conflict
EFD triggered
Related Commands
DescriptionCommand
Displays the current active Ethernet OAM configuration on
an interface.
show ethernet oam configuration, on page 366
Displays the current status of Ethernet OAM sessions.show ethernet oam discovery, on page 369
Displays the local and remote Ethernet OAM statistics for
interfaces.
show ethernet oam statistics, on page 377
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
376
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet oam interfaces

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model