show frame-relay multilink
To display the multilink Frame-Relay (MFR) information about the given interface along with MFR protocol
and internal statistics, use the show frame-relay multilink interface command in EXEC mode.
show frame-relay multilink [detail [location node id]| interface type interface-path-id [detail| verbose]|
location node id| verbose [location node id]]
Syntax Description
(Optional) Displays Interface Descriptor Block (IDB) information and Feasible
Successor Metrics (FSM) statistics.
detail
(Optional) Displays information about all interfaces on the specified node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
(Optional) Interface for which you want to display information.interface
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays IDB information, FSM statistics and internal statistics.verbose
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
468
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay multilink
To Next Page
Loading...
Need help?
General
