Cisco ASR 9000 Series Command Reference Guide

clear ethernet cfm offload
To trigger the re-application of Maintenance End Points (MEPs) that have been disabled due to exceeding
offload resource limits, use the clear ethernet cfm offload command in the EXEC mode.
This command does not clear any counters or stored statistics for the MEPs.Note
clear ethernet cfm offloadlocationnode-id
Syntax Description
(Optional) Specifies the location for which the re-application of MEPs
needs to be triggered.
location node-id
Command Default
The default action is to clear the CFM offload information for all nodes.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executeethernet-services
Examples
This example shows how to execute the clear ethernet cfm offload command:
RP/0/RSP0/CPU0:router# clear ethernet cfm offload
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
170
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet cfm offload

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model