Cisco ASR 9000 Series Command Reference Guide

Detection FSM transitions (to each state)
Unknown: 12
Bidirectional: 12
Unidirectional: 0
Neighbor mismatch: 0
Loopback: 0
Rx packet counts
Probe: 1
Echo: 1819
Flush: 5
Invalid packets (dropped): 154
Tx packet counts
Probe: 1
Echo: 1824
Flush: 0
Unable to send (dropped): 0
Node 0/10/CPU0
Counters last cleared: 01:12:11 ago
Received on ports without UDLD configured
Total packet count: 12
Last port: Gi0/10/0/5
Rx port could not be determined: 0
Related Commands
DescriptionCommand
Displays a summary of UDLD protocol states for each
interface.
show ethernet udld interfaces, on page 393
Displays the local and remote Ethernet OAM statistics for
interfaces.
show ethernet oam statistics, on page 377
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
397
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet udld statistics

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model