Cisco ASR 9000 Series Command Reference Guide

Examples
In the following example, the interface command is given for the card in location 0/2/0/1, and interface
configuration mode is entered for that interface:
RP/0/RSP0/CPU0:router(config)# interface POS 0/2/0/1
Related Commands
DescriptionCommand
Clears interface statistics or packet counters.clear interface, on page 497
Disables an interface (forces an interface to be administratively
down).
shutdown (global), on page 531
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
502
Global Interface Commandsonthe Cisco ASR 9000 Series Router
interface (global)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model