Cisco ASR 9000 Series - Clear Ethernet Cfm CCM-Learning-Database Location

clear ethernet cfm ccm-learning-database location
To clear the Continuity Check Message (CCM) learning database, use the clear ethernet cfm
ccm-learning-database location command in EXEC mode.
clear ethernet cfm ccm-learning-database location {all| node-id}
Syntax Description
Clears the CCM learning database for all interfaces.all
Clears the CCM learning database for the designated node, entered in r
ack/slot/module notation.
node-id
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeethernet-services
Examples
The following example shows how to clear all the CFM CCM learning databases on all interfaces:
RP/0/RSP0/CPU0:router# clear ethernet cfm ccm-learning-database location all
Related Commands
DescriptionCommand
Displays the CCM learning database.show ethernet cfm ccm-learning-database, on page 320
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
165
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet cfm ccm-learning-database location