EasyManuals Logo

Cisco ASR 9000 Series Command Reference Guide

Cisco ASR 9000 Series
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
clear ethernet cfm local meps
To clear the counters for all MEPs or a specified MEP, use the clear ethernet cfm local meps command in
EXEC mode.
clear ethernet cfm local meps {all| domain domain-name {all| service service-name {all| mep-id id}}|
interface interface-name {all| domain domain-name}}
Syntax Description
Clears counters for all local MEPs.all
String of a maximum of 80 characters that identifies the domain in which
the maintenance points reside.
For more information about the syntax, use the question mark (?)
online help function.
Note
domain domain-name
String of a maximum of 80 characters that identifies the maintenance
association to which the maintenance points belong.
service service-name
Maintenance end point (MEP) ID number. The range for MEP ID numbers
is 1 to 8191.
mep-id id
String of a maximum of 80 characters that identifies the Ethernet interface.
interface interface-name
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The following counters are cleared:
•
Number of continuity-check messages (CCMs) sent
•
Number of CCMs received
•
Number of CCMs received out of sequence
•
Number of CCMs received, but discarded due to the maximum-meps limit
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
168
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet cfm local meps

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals