Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Link Bundling Commands on the Cisco ASR 9000
Series Router
This module provides command line interface (CLI) commands for configuring Link Bundle interfaces on
the Cisco ASR 9000 Series Router.
•
backbone interface, page 565
•
bundle-hash, page 567
•
bundle id, page 572
•
bundle load-balancing hash, page 574
•
bundle load-balancing hash (EFP), page 576
•
bundle maximum-active links, page 578
•
bundle minimum-active bandwidth, page 580
•
bundle minimum-active links, page 581
•
bundle port-priority, page 583
•
bundle wait-while, page 585
•
clear lacp counters, page 586
•
hw-module load-balance bundle l2-service l3-params, page 588
•
interface (bundle), page 590
•
isolation recovery-delay, page 591
•
lacp cisco enable, page 592
•
lacp churn logging, page 594
•
lacp collector-max-delay , page 595
•
lacp fast-switchover, page 596
•
lacp non-revertive, page 598
•
lacp packet-capture, page 599
•
lacp period short, page 602
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
563