Cisco ASR 9000 Series Command Reference Guide

RP/0/RSP0/CPU0:router(config-if)# mac-accounting ingress
This example shows how to enable MAC accounting for the source MAC address on the egress direction:
RP/0/RSP0/CPU0:routerconfigure
RP/0/RSP0/CPU0:routerinterface bundle-ether <bundle-id>
RP/0/RSP0/CPU0:router(config-if)# mac-accounting egress
In order to view the mac-accounting statistics for the configured bundle interface, use the show
mac-accounting bundle-ether <bundle id> command.
Note
Related Commands
DescriptionCommand
Clears MAC accounting statistics for an interface.clear mac-accounting (Ethernet), on page 81
Displays MAC accounting statistics for an interface.show mac-accounting (Ethernet), on page 123
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
100
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
mac-accounting

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model