Cisco ASR 9000 Series Command Reference Guide

Command Default
Default interval period is 300 seconds.
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 5.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When error disable recovery is enabled, the interface automatically recovers from the error-disabled state,
and the device retries bringing the interface up.
Task ID
OperationTask ID
read, writeethernet-services
Examples
This example shows how to enable error disable recovery for cluster-udld with interval 60:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router#error-disable recovery cause cluster-udld interval 60
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
206
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
error-disable recovery cause

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model