Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Task ID
OperationsTask ID
readfr
Examples
The following example shows the output from the show frame-relay pvc command:
RP/0/RSP0/CPU0:router# show frame-relay pvc
PVC Statistics for interface POS0/3/2/0 (Frame Relay DCE)
Active Inactive Deleted Static
Local 4 0 0 0
Switched 0 0 0 0
Dynamic 0 0 0 0
DLCI = 612, DLCI USAGE = LOCAL, ENCAP = CISCO, INHERIT = TRUE, PVC STATUS = ACT
VE, INTERFACE = POS0/3/2/0.1
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN packets 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
pvc create time 00:00:00 last time pvc status changed 00:00:00
DLCI = 613, DLCI USAGE = LOCAL, ENCAP = CISCO, INHERIT = TRUE, PVC STATUS = ACT
VE, INTERFACE = POS0/3/2/0.2
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN packets 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
pvc create time 00:00:00 last time pvc status changed 00:00:00
DLCI = 614, DLCI USAGE = LOCAL, ENCAP = CISCO, INHERIT = TRUE, PVC STATUS = ACT
VE, INTERFACE = POS0/3/2/0.3
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN packets 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
pvc create time 00:00:00 last time pvc status changed 00:00:00
DLCI = 615, DLCI USAGE = LOCAL, ENCAP = CISCO, INHERIT = TRUE, PVC STATUS = ACT
VE, INTERFACE = POS0/3/2/0.4
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN packets 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
pvc create time 00:00:00 last time pvc status changed 00:00:00
The following example shows the output for a specific frame-relay PVC:
RP/0/RSP0/CPU0:router# show frame-relay pvc 613
DLCI = 613, DLCI USAGE = LOCAL, ENCAP = CISCO, INHERIT = TRUE, PVC STATUS = ACTI
VE, INTERFACE = POS0/3/2/0.2
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN packets 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
481
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay pvc