Cisco ASR 9000 Series Command Reference Guide

T3, E3, T1, E1 Controller Commands on the Cisco
ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring T3/E3 and T1/E1 controllers
on the Cisco ASR 9000 Series Router.
•
bert e1, page 938
•
bert e3, page 941
•
bert error, page 943
•
bert interval, page 945
•
bert pattern, page 947
•
bert t1, page 950
•
bert t3, page 953
•
cablelength, page 955
•
channel-group, page 957
•
clear controller lnm, page 959
•
clear controller t1, page 962
•
clear controller t3, page 964
•
clock source (T1/E1), page 966
•
clock source (T3/E3), page 968
•
controller e1, page 970
•
controller e3, page 972
•
controller t1, page 974
•
controller t3, page 976
•
delay clear (T1/E1), page 978
•
delay clear (T3/E3), page 980
•
delay trigger (T1/E1), page 982
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
935

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model