Cisco ASR 9000 Series Command Reference Guide

show mlacp inconsistencies
To check and highlight inconsistencies and misconfigurations in mlacp setup, use the show mlacp
inconsistencies command in EXEC mode.
show mlacp inconsistencies
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator.
Task ID
OperationTask ID
readbundle
Examples
The followig example shows how to view mlacp inconsistencies:
RP/0/RSP0/CPU0:router # show mlacp inconsistencies
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
530
Global Interface Commandsonthe Cisco ASR 9000 Series Router
show mlacp inconsistencies

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model