Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to configure the 10GE interface for transmit-only mode:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# interface TenGigE 0/1/0/1
RP/0/RSP0/CPU0:router(config-if)# transport-mode tx-only
RP/0/RSP0/CPU0:router(config-if)# commit
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
129
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
transport-mode