Cisco ASR 9000 Series Command Reference Guide

VLAN Subinterface Commandsonthe
Cisco ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring IEEE 802.1Q VLANs on
the Cisco ASR 9000 Series Router.
The maximum VLAN limit that can be configured for a specific card is listed below:
Table 64: Maximum VLAN Limit per Slice for Below Cards
VLAN MAX Limit per SliceCard
16260NC6-60X10GE-M-S
1884NC6-10X100G-M-P
1884NC6-10X100G-M-K
•
dot1q vlan, page 1090
•
interface (VLAN), page 1092
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1089

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model