Cisco ASR 9000 Series Command Reference Guide

CONTENTS
Preface Preface xix
Changes to This Document xix
Obtaining Documentation and Submitting a Service Request xix
CHAPTER 1 Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router 1
admin-state 3
controller dwdm 5
g709 bdi-to-client-gais 7
g709 enable 8
g709 fec 9
g709 odu overhead tti 11
g709 odu report disable 13
g709 otu overhead tti 15
g709 otu report disable 17
g709 otu threshold 19
g709 tim-to-client-gais 21
g709 tti-processing 22
log signal 24
loopback (DWDM) 26
network connection id 28
network port id 30
pm fec report enable 32
pm fec threshold 34
pm optics report enable 36
pm optics threshold 38
pm otn report enable 40
pm otn threshold 43
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
iii

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model