Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Examples
The following example shows how to configure load balancing for L2 services using L3 parameters:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# hw-module load-balance bundle l2-service l3-params
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
589
Link Bundling Commands on the Cisco ASR 9000 Series Router
hw-module load-balance bundle l2-service l3-params